 |
 |
Bachelor of Science - Electrical Engineering Technology
Accredited by the Technology Accreditation Commission of the Accreditation Board of Engineering and Technology, 111 Market Place, Suite 1050, Baltimore, MD 21202-4012 - telephone: (410) 347.7700.
Students who receive the Associate of Science degree in electrical engineering technology or biomedical electronics technology are eligible to enter this Bachelor of Science degree program. All transfer students should meet IUPUI requirements for the Associate of Science degree. The program provides additional study in electrical engineering technology as well as related technical and nontechnical areas essential in modern industry. Graduates of this program are qualified for high-level positions as technologists in diverse industries such as automotive electronics, computer electronics, military electronics, factory automation, broadcasting, electronics manufacturing, telecommunications, energy and power, consumer electronics, robotics, and instrumentation.
Six specialty tracks are available in the B.S. program: communication systems, control systems, digital/microprocessor systems, electronic devices and systems, electronics manufacturing, and power systems. Within each of these tracks, 65 semester hours beyond the A.S. degree are required in the areas of science and mathematics, technical specialty, communications, humanities and social science, and interdisciplinary technical electives. The B.S. requirements are listed below; the recommended curriculum for each specialty track follows.
Junior Year
Fifth Semester
| ECET 307 | Analog Network Signal Processing | 4 cr. |
| ECET Elective | 4 cr. | |
| Math 222 | Calculus for Technology II | 3 cr. |
| STAT 301 | Elementary Statistics | 3 cr. |
| TCM 220 | Technical Report Writing | 3 cr. |
Sixth Semester
| ECET Elective | 4 cr. | |
| ECET 231 | Electrical Power & Controls | 4 cr. |
| Interdisciplinary Technical Elective (See dept. for approved course list) |
3 cr. | |
| TCM 370 | Oral Practicum for Technology | 3 cr. |
Senior Year
Seventh Semester
| ECET Elective | 4 cr. | |
| CHEM C101 & C121 | Elementary Chemistry I | 3 cr. & 2 cr. |
| ECET 490 | Senior Design Project Phase I | 2 cr. |
| Interdisciplinary Technical Elective (See dept. for approved course list) |
3 cr. | |
| CHSS Elective (See dept. for approved course list) |
3 cr. |
Eighth Semester
| ECET Elective | 4 cr. | |
| Interdisciplinary Technical Elective (See dept. for approved course list) |
3 cr. | |
| ECET 491 | Senior Design Project Phase II | 2 cr. |
| CHSS Electives (See dept. for approved course list) |
6 cr. |
(15 cr.)
TOTAL CREDIT HOURS REQUIRED FOR EET BS DEGREE: 128
Communication Systems
The communication systems track prepares graduates for career opportunities in communication systems, signal processing, applications and specifications of systems, computer networking, and broadcasting. Students in this track study analog and digital communication systems, radio transmissions and reception, audio signal processing, and local area networks.
ECET Technical Specialty Electives:
ECET 302 Introduction to Control Systems
ECET 304 Introduction to Communication Systems
ECET 357 Real-Time Digital Signal Processing
ECET 403 Date-communications and Telecommunications
ECET 483 Network Fundamentals with Microcontrollers
Interdisciplinary Technical Electives:
Minimum of 9 hours with approval of advisor. See the current plan of study for course suggestions.
Control Systems
The control systems track prepares graduates for career opportunities in the design and analysis of automatic control systems, including control hardware and software used in automation, robotics, industrial controllers, and military electronics systems. Prospective fields of employment are manufacturing industries, processing industries, and other areas of commerce that use control systems.
ECET Technical Specialty Electives:
ECET 302 Introduction to Control Systems
ECET 309 Advanced Embedded Microcontrollers
ECET 357 Real-Time Digital Signal Processing
ECET 371 Automation, Instrumentation, and Process Control
ECET 472 Automatic Control Systems
Interdisciplinary Technical Electives:
Minimum of 9 hours with approval of advisor. See the current plan of study for course suggestions.
Digital/Microprocessor Systems
The digital/microprocessor track prepares graduates for career opportunities in design, testing, and troubleshooting of computer-based systems. Instruction is provided in computer hardware and software design, computer networking systems, and advanced digital design techniques utilizing simulation and computer-based design tools. Applications are found in consumer products, automation systems, computer systems, military electronics, communications, and instrumentation.
ECET Technical Specialty Electives:
ECET 309 Advanced Embedded Microcontrollers
ECET 357 Real-Time Digital Signal Processing
ECET 371 Automation, Instrumentation, and Process Control
ECET 417 Advanced Digital Systems Design with VHDL
ECET 483 Network Fundamentals with Microcontrollers
Interdisciplinary Technical Electives:
Minimum of 9 hours with approval of advisor. See the current plan of study for course suggestions.
Electronic Devices and Systems
The electronic devices and systems track prepares graduates for career opportunities in analog and digital systems, signal processing, and integrated circuit technologies. Students in this track study analog and digital devices and systems, communications, D/A-A/D technologies, computer simulation, and applied analysis of circuits.
ECET Technical Specialty Electives:
ECET 302 Introduction to Control Systems
ECET 304 Introduction to Communications Systems
ECET 360 CIM in Electronics Manufacturing
ECET 417 Advanced Digital Systems Design with VHDL
ECET Elective
Interdisciplinary Technical Electives:
Minimum of 9 hours with approval of advisor. See the current plan of study for course suggestions.
Electronics Manufacturing
The electronics manufacturing track prepares graduates for career opportunities with a wide variety of manufacturers of electronic equipment. This fast-growing industry includes companies which manufacture audio, video, medical, computer, and consumer electronic equipment. Students in this track study computer interfacing, automated circuit board assembly, industrial automation, robotics, and process control.
ECET Technical Specialty Electives:
ECET 309 Advanced Embedded Microcontrollers
ECET 360 CIM in Electronics Manufacturing
ECET 371 Automation, Instrumentation, and Process Control
ECET 417 Advanced Digital Systems Design with VHDL
ECET 483 Industrial Local Area Networks
Interdisciplinary Technical Electives:
Minimum of 9 hours with approval of advisor. See the current plan of study for course suggestions.
Power Systems
The power track prepares graduates for career opportunities in the areas of power transmission and distribution in both the utility and the industrial setting. Applications include industrial power distribution, fault studies, fuse coordination, system economic analysis, lighting design, transmission losses, and power system protection.
ECET Technical Specialty Electives:
ECET 302 Introduction to Control Systems
ECET 331 Generation & Transmission of Elect Power or ECET Elective
ECET 371 Automation, Instrumentation, and Process Control
ECET 381 Electrical Distribution Systems
ECET Elective
Interdisciplinary Technical Electives: Minimum of 9 hours with approval of advisor. See the current plan of study for course suggestions.
Electronics Manufacturing Technology
Do you like to make things? Are you interested in electronics and computers? Then maybe a career in electronics manufacturing is for you!
The electronics industry is one of the fastest growing in the world. As products such as cellular phones become smaller, and computers become faster, the building of these products becomes more complicated. There is a great need in industry for highly skilled workers.
In the electronics manufacturing option of computer integrated manufacturing technology, you study a wide range of general topics in both electronics and manufacturing. In addition, courses in electronics manufacturing teach you the special processes used by industry today. These courses have a laboratory component, so you can "get your hands on" the latest equipment and do it yourself. Industrial organization and quality techniques classes help prepare you for the business side of industry. And math and science courses give you the foundation for learning now and keeping up in the future. This unique combination prepares you to compete and succeed in the exciting world of electronics manufacturing.
- Electronics Manufacturing
ECET Bachelors Track... - Computer Integrated Manufacturing Technology Electronics Option
CIMT Associate Degree... - Certificate in Electronics Manufaturing
Core courses include EET M150, EET M200, EET M290...
For more information regarding Electronics Manufacturing contact:
Elaine Cooney, Program Director
Phone: 317.274.2363
Fax: 317.278.0789
For more information regarding EMT
contact Elaine Cooney
Advanced Curriculum Program
Electrical engineering technology students interested in pursuing advanced degrees in science, engineering, or professional registration are encouraged to take the EET department's Advanced Curriculum Program (ACP).1 This program maximizes a student's undergraduate preparation in the mathematics, science, and engineering science required for advanced studies within the framework of the B.S. degree program. The ACP requirements are listed below, with the four-year technology course substitution shown in parentheses.
Math and Science:
| MATH 163 | Integrated Calculus and Analytic Geometry I | (in place of MATH 221) |
| MATH 164 | Integrated Calculus and Analytic Geometry II | (in place of MATH 222) |
| STAT 511 | Statistical Methods I | (in place of STAT 301) |
| PHYS 152 | Mechanics | (in place of PHYS 218) |
| PHYS 251 | Heat, Electricity, and Optics | (PHYS 219) |
| CHEM C105 & CHEM C125 |
Principles of Chemistry I & Lab | (in place of CHEM C101) |
| MATH 261, 262 | Multivariate Calculus & Linear Algebra and Differential Equations |
Interdisciplinary Technical Electives:
Minimum of 12 hours with approval of advisor.
Note: For details on specific program, consult a department advisor.
[an error occurred while processing this directive]